MX-FR43U
Data Security Kit
Operation Guide
Contents
● Document control function.......................................................................................................4
● Authority group registration screen..........................................................................................5
● Restrictions on tandem copying and tandem printing..............................................................7
● Security Settings in the FTP Pull Print Function......................................................................8
● Transferring copied data..........................................................................................................8
Security settings..........................................................................................................................10
● Settings added to the security settings..................................................................................10
● Clear Data Area.....................................................................................................................12
Introduction
The MX-FR43U adds a security function to the SHARP Digital Full Color Multifunctional
System.
When the copy, printer of a SHARP Digital Full Color Multifunctional System with the security
function is used, image data generated in each job is encrypted, and when the job is finished, the
encrypted data is immediately erased from the memory and hard disk.
■ Note:
To ensure that the data security function of the machine provides maximum security,
observe the following:
● The administrator plays an important role in maintaining security. Exercise appropriate
care in selecting the person that will assume the job of administrator.
● Be sure to change the administrator password immediately each time a new person
takes over as administrator.
● Change the administrator password on a regular basis (at least once every 60 days).
● Do not select a password that can be easily guessed for the administrator password
.
● The setting mode (administrator) are very important for security management. If you
leave the machine when using the setting mode (administrator), be sure to tap the
[Logout] key to quit the setting mode (administrator). The administrator of the machine
should inform users that they are not to access the setting mode (administrator)
without permission.
● The customer bears responsibility for control of copies of documents made on the
machine on the machine.
■ Backing up and clearing data stored with the document filing
function
When the data security kit is installed, data previously stored in the machine with the
document filing function is cleared. For this reason, any data that you need to keep is
copied to a computer before the data security kit is installed, and then returned to the
machine after installation and clearing of the previous data. (This work is normally
performed by a service technician at the time of installation of the data security kit.)
Only confidential folders can be used to return data from a computer to the machine after
installation of the data security kit. Before returning data from a computer to the
machine, create confidential folders if needed.
2
■ About passwords for the Web page
If an incorrect "users" or "admin" password is entered 3 times in a row when attempting
to access the Web pages of a machine that has the data security kit installed, access to
pages that require entry of the "users" or "admin" password will be prohibited for 5
minutes.
Some of the procedures for operating the machine change when the data
security kit is installed. The manuals for the machine explain the procedures for
operating the machine when data security kit is not installed. This manual
explains the changes to those procedures when the data security kit is installed.
3
When the data security kit is
installed
1
When the data security kit is installed, the following icon appears on the touch panel.
Tap the icon ( ) to display the next screen, and then tap the icon ( ) to view
information on the data security kit version.
When the data security kit is installed, data remaining in the machine is automatically
erased after each job.
When data clearing begins, the message "Data is being cleared." appears for 6
*
seconds .
* The duration of the message display can be changed with "Message Time Setting" in
the setting mode (administrator).
(➞ Settings (Administrator) > "System settings" > "Operation Settings" > "Message
Time Setting")
If the machine power is turned off while image data is being cleared from the
hard disk drive or before a job is finished, the data may not be completely
erased. If you do not wish to leave partially cleared data when the power is
turned off, it is recommended that you use the program "Clear All Memory"
Security settings of the data security kit
When the data security kit is installed, settings to enhance security of the machine can be
Document control function
The document control function is used to embed a document control pattern on the paper
when print jobs, copies are printed.
The embedded document control pattern prevents secondary copying and other operations
this manual).
Document Filing
To use the document filing function to store jobs in the machine when the data security kit is
installed, set the file property to "Confidential".
Files set to the "Sharing" or "Protect" properties cannot be stored. In addition, to print from a
computer using the retention function, enter a password in the printer driver settings (when
the factory default setting is in effect).
4
When the data security kit is installed
Authority group registration screen
When the data security kit is installed, the following items are added to the "Authority Group
Registration" menu screen in the setting mode (administrator). This screen is displayed by
selecting "Settings (Administrator)" > "User Control" > "Authority Group List".
● Approve Print Jobs other than Print Hold Job
When the [OK] key is tapped, print jobs other than hold jobs are allowed in authority
group registration when user authentication is enabled.
After selecting the desired checkboxes, tap the [OK] key.
● Document Filing Approval Setting
When storing an authority group for user authentication, tap this key to select whether
or not document filing is allowed in each filing mode and for each job type.
To enable a filing mode, tap the checkbox of the mode to select it.
After selecting the desired checkboxes, tap the [OK] key.
Document filing must be allowed in the following settings.
By default, document filing is only allowed in confidential mode.
● Allow document filing in authority group registration (this setting)
Protecting passwords
When the data security kit is installed, passwords entered from the operation panel of the
machine or the Web pages can be protected.
■ Administrator Password/User Password
When the data security kit is installed, password entry will be locked for 5 minutes if an
incorrect administrator password is entered 3 times in a row when the user
authentication function is not enabled, or if an incorrect administrator password or user
password is entered 3 times in a row when the user authentication function is enabled.
5
When the data security kit is installed
■ Confidential folders and confidential files of the document
filing function
If an incorrect password is entered 3 times in a row for a specific confidential folder or
● All files with the same user name and password can be printed at once using
the Batch Print feature of the document filing function.
Files that have a password different from the password that was entered at the
time of the search will be treated as files for which an incorrect password was
entered. For this reason, it is recommended that you avoid executing
searches using [All Users] and [User Unknown] in so far as is possible.
● When the use of a file is prohibited, the following will apply when the document
filing function is used:
● When batch print is performed, a prohibited file will not be printed even if it
matches the search conditions.
■ File search screen of document filing
When the data security kit is installed, the password entry setting will not appear in the
document filing search screen.
■ Encrypted PDF
When a job is printed by encrypted PDF direct printing, the job will appear in the spool
queue of the job status screen and a password must be entered to begin printing.
If an incorrect password is entered 3 times in a row when the data security kit installed,
the message "Operation is disabled. Please see your administrator for your assistance."
will be displayed for 6 seconds and printing will be locked.
If you tap a file in the spool screen for which an incorrect password was entered 3 times,
the message "The print of this job is disabled. Delete the job?" will appear.
●Tap the [Yes] button to delete the print job.
●Tap the [No] button to cancel deletion of the print job.
manual).
■ FTP Pull Print
When the FTP Pull Print function is used to directly print a file on an FTP server, a "User
Name" and "Password" must be entered when the FTP server is selected. When the
data security kit is installed, entry will be locked for 5 minutes if an incorrect "User Name"
or "Password" is entered 3 times in a row.
6
When the data security kit is installed
■ Login when user authentication is enabled
When "User Authentication" in the setting mode (administrator) is enabled, login is
required in the login screen before the machine can be used. When "A Warning when
Login Fails" (Settings (Administrator) > "User Control" > "Default Settings") is enabled,
the machine will lock for 5 minutes if login fails 3 times in a row.
The "A Warning when Login Fails" setting is always enabled when the data security kit
installed.
Restrictions on tandem copying and tandem printing
Tandem copying and tandem printing operate as shown below based on the configuration of
the master machine and slave machine (whether or not the data security kit is installed).
■ Tandem copying
Slave machine
Data security kit: Yes
Data security kit: No
The tandem function can be
used. Data is encrypted and
cleared from both the master
and slave machines.
The tandem function cannot
be used.
Data
security
kit: Yes
The tandem function can be
used. Data is encrypted and
cleared from the slave
machine.
The regular tandem function
can be used.
Data
security
kit: No
■ Tandem printing
Slave machine
Data security kit: Yes
Data security kit: No
The tandem function can be
used. Data is encrypted and
cleared from both the master
and slave machines.
The tandem function can be
used. Data is encrypted and
cleared from the slave
machine.
Data
security
kit: Yes
The tandem function can be
used. Data is encrypted and
cleared from the slave
machine.
The regular tandem function
can be used.
Data
security
kit: No
7
When the data security kit is installed
Security Settings in the FTP Pull Print Function
When the machine is used as a network printer and the FTP Pull Print function is used, the
data security kit enables authentication of the user by means of a "User Name" and
"Password" for the FTP server. (The Pull Print function allows a file on a previously stored
FTP server to be printed directly from the operation panel of the machine without using the
printer driver.)
User authentication is enabled by selecting the [Enable User Authentication] checkbox on
the machine for configuring FTP Pull Print settings. This checkbox appears when the data
security kit is installed, and is initially selected (a checkmark appears).
■
Procedure for directly printing a file on an FTP server (when
user authentication is enabled)
Your user name and password must be entered following selection of the FTP server
that contains the file to be printed from the touch panel of the machine.
When the FTP server is selected in step 3 of "DIRECTLY PRINTING A FILE ON AN FTP
SERVER" in "PRINTER" in the User's Manual (PC), a screen will appear prompting you
to enter your user name and password for the FTP server.
Tap the [User Name] key to enter your user name and the [Password] key to enter your
password. A letter entry screen will appear in each case.
When you have finished entering your user name/password, tap the [OK] key.
After entering your user name and password, continue from step 4 of "DIRECTLY
PRINTING A FILE ON AN FTP SERVER" in "PRINTER" in the User's Manual (PC).
Transferring copied data
When the data security kit is installed and the Web pages are used to copy data stored with
the document filing function to a computer, the copied data can only be transferred back to
the original machine from which it was copied.
The data cannot be transferred to another machine even if the machine conditions are the
same.
The [Restore from PC] key will only appear on the Web page and transfer of data back to
the machine will only be possible when a confidential folder is selected.
8
When the data security kit is installed
Product Key
To initially enable the security function, you must use "System Settings" in the setting mode
(administrator) to enter the product key (password). The name of the system setting used
for this purpose is "DATA SECURITY KIT". Please ask your dealer for the product key. (This
work is performed by a service technician at the time of installation of the data security kit.)
9
Security settings
2
This section explains the "Security Settings" items that are added when the data security kit
is installed.
Using the security settings in the setting mode
(administrator)
Follow the procedure in "Setting Mode" of the User's Manual (PC) to configure the settings
in the setting mode (administrator).
For explanations of each of the settings, see the following pages.
If an incorrect administrator password is entered 3 times in a row on a machine
that has the data security kit installed, entry of the administrator password will be
locked for 5 minutes.
Settings added to the security settings
When the data security kit is installed, settings related to security are added to the "Security
Settings".
Setting
Page Explanation
Use this to manually clear stored data
from each area of the machine's
memory and hard drive.
Data*
Select data clear items and the number
of data clear times.
Set the items that you wish to disable.
17 Use this to disable specific operations
to prevent the output of sensitive
document data.
10
Security settings
Setting
Page Explanation
Use this to select whether or not the job
18 status completed job screen is
displayed.
Use this to select whether or not
filenames of print jobs and destination
names of image send jobs are
displayed in the job status screen.
Use this to release locked files and
folders.
*
When user authentication is enabled, a user cannot configure this setting even when the
authority group gives the user the authority to configure security settings.
(This operation can only be performed by an administrator.)
The "Other Settings" in the above settings can also be configured in the Web
page of the machine.
11
Security settings
Clear Data Area
This function is used to manually clear data saved in each area of the memory or hard disk
of the machine.
■ Clear All Memory
This program is used to manually clear all data from the memory and hard disk of the machine.
Note, however, that the following types of data are not cleared with this setting. Use
following types of data.
● User Information
● Individual/Group/Program (Address only)/Resend
● Forward Information
Step 1: Tap the [Clear] key.
The confirmation message "Clear all memory. (Exclusive of address book/user list
data.)" will appear.
● To return to the previous menu screen, tap the [Cancel] key.
Step 2: Tap the [OK] key.
The message "Please wait." appears, and then the message "Clearing all memory." is
displayed.
● During clearing, progress will be shown as a percentage together with the number of
repetitions.
● When clearing is completed, the confirmation message will appear.
If you wish to cancel data clearing...
Tap the [Cancel] key. The administrator password entry screen will appear. Enter the
administrator password. As soon as the correct password is entered, data clearing will
be canceled and the power will turn off briefly and then turn back on automatically.
● Even if data clearing is canceled, the data availability is not secured.
Step 3: Tap the [OK] key to restart the machine.
12
Security settings
■ Clear All Data in Jobs Completed List
Use this when you wish to clear all data of the items below, which appear in the job
status jobs completed screen.
(The job status jobs completed screen appears when the [Complete] key (job status
screen selector key) of the job status screen is tapped.)
● Printer user names
● Image send destinations
Step 1: Tap the [Clear] key.
A confirmation message prompting you to select "Yes" or "No" will appear.
Step 2: Tap the [OK] key.
Data clearing is executed.
However, it is not possible to cancel during clearing.)
■ Clear Document Filing Data
This function is used to clear data stored using the document filing function.
Data whose property is set to "Protect" or "Confidential" is also cleared.
● [File Data (Including protected/confidential files)] checkbox:
Select this checkbox to clear all files stored using "File" in the main folder and in custom folders.
● [Quick File Data (Including protected files)] checkbox:
Select this checkbox to clear all files stored using " Quick File ".
Step 1: Tap the [Clear] key.
A confirmation message prompting you to select "Yes" or "No" will appear.
Step 2: Tap the [OK] key.
The selected data is cleared.
(Operation during clearing is the same as when "Clear All Memory" (page 12 of this manual) is performed.)
13
Security settings
■ Clear Address Book and Registered Data
This function is used to clear the items indicated below, which cannot be cleared or
Defaults" (
➞
Settings (Administrator) > "Storing/Calling of System Settings" > "Restore
Factory Defaults").
The following types of data can be cleared.
●User Information
*1
●Individual/Group/Program (Address only)/Resend
*2
●Forward Information
*1
The name may vary depending on the options that are installed.
Select this when you only wish to erase stored forwarding information.
*2
Step 1: Select the checkbox of each item that you wish to clear.
Step 2: Tap the [Clear] key.
A confirmation message prompting you to select "Yes" or "No" will appear.
Step 3: Tap the [OK] key.
The selected data is cleared.
However, it is not possible to cancel during clearing.)
14
Security settings
Other Settings
This system enables various settings such as setting the timing and the number of times
data is automatically cleared and setting the items to prohibit operations and displays.
■ Power Up Auto Clear
This function is used to automatically clear all data in the machine when the power
switch is turned on.
The following types of data can be cleared.
● All Memory
● File Data(Including protected/confidential files)
● Quick File Data(Including protected files)
● Job Status Jobs Completed List
Select the checkboxes of the data to be automatically cleared when the power switch is
switched on. When you have finished selecting the checkboxes, tap the [Submit] key.
No checkboxes are initially selected.
When there is a stored image send job (network scanning job), "Power Up Auto
Clear" will not take place when the power is turned on.
If you wish to cancel data clearing...
15
Security settings
■ Number of Times Data Clear is Repeated/Number of Times
Power Up Auto Clear Program is Repeated/Number of Times
Auto Clear at Job End Program is Repeated
To further strengthen the security settings, you can have data clearing repeated a set
number of times in each area.
Tap the select box
of each item and select the number of times that you wish data
clearing to be repeated. When finished, tap the [Submit] key.
● Number of Times Data Clear is Repeated
The number of times data clearing is repeated when "Clear All Memory", "Clear
Document Filing Data", "Clear All Data in Jobs Completed List", or "Clear Address
Book and Registered Data" is executed can be set to any number from 1 to 7. The
factory setting is 1.
● Number of Times Power Up Auto Clear Program is Repeated
The number of times "Power Up Auto Clear" is repeated can be set to any number
from 1 to 7. The factory setting is 1.
This setting is only enabled when the [Power Up Auto Clear] checkbox is
selected.
● Number of Times Auto Clear at Job End Program is Repeated
The number of times auto clear is repeated after each job is completed can be set to
any number from 1 to 7. The factory setting is 1.
About the repeat setting
When the repeat setting (number of repetitions) is increased to enhance the security
function, the time required for data clearing increases.
It is recommended that you select repeat settings for "Number of Times Data Clear is
"Number of Times Auto Clear at Job End Program is Repeated" that are suitable for
your security needs and conditions of use.
16
Security settings
■ Disabling of Document Filing
This program is used to restrict the filing modes of the document filing function.
Document filing modes (Quick File Mode, Sharing Mode, and Confidential Mode) can be
separately disabled in each mode in which document filing operates (Copy, Printer, Scan
to HDD, and Image Send mode).
● Tap the checkboxes of filing modes that you wish to disable. When you have finished
selecting the checkboxes, tap the [Submit] key.
● The property of a file that is already stored cannot be changed using "Property
Change" (
to a disabled filing mode.
User's Manual (PC) "Changing the property" in "DOCUMENT FILING")
☞
If a certain property is disabled in "Disabling of Document Filing" and a file exists
that was previously stored with this property, the property of the stored file can
be changed to another property.
When printing with the printer function, even formats for storing files that have been
disabled with this program will appear in the Job Handling screen of the printer driver
(
User's Manual (PC) "SAVING AND USING PRINT FILES (Force retention/
☞
document filing)" in "PRINTER"). However, if a disabled file format is selected when
printing a file, the file will not be stored (only printing will take place).
■ Disabling of List Print
This program is used to disable printing of any of the following lists that are printed using
"List Print (User)" in the setting mode (general).
"All Custom Setting List", "Sending Address List", "Document Filing Folder List"
Select the checkboxes of the lists for which you wish to disable printing. After selecting
the desired checkboxes, tap the [Submit] key.
17
Security settings
■ Disabling of Print Jobs Other Than Print Hold Job
Printing in print mode other than from the operation panel of the machine can be
prohibited. This setting can be used to prevent sensitive documents left on the output tray
from being taken by a third party, which could result in the leaking of sensitive information.
● To prohibit printing other than from the operation panel, select the checkbox. To print
when the prohibit setting has been selected, follow the steps below.
Step 1: Set the "Retention" setting in the printer driver to [Hold Only] and select
the print command.
The print job will appear on the operation panel of the machine.
Step 2: Select your print job and execute printing. (
PRINTING" in "DOCUMENT FILING")
User's Manual (PC) "FILE
☞
If "Hold After Print" or "Sample Print" is selected before the print command is
executed, printing will not take place. However, the job will be held in the
machine and can be printed from the operation panel using the document filing
function in the same way as a "Hold Only" job.
■ Jobs Completed List Display Setting
You can select whether or not the job status completed jobs screen (job status screen
selector key) is displayed.
If you prefer not to have the information (print mode user names, image send
destinations, senders of that are received, etc.) that is stored and shown in the job status
completed jobs screen be displayed for security reasons, use this setting to hide the
screen.
● To hide the job status jobs completed screen, tap the checkbox of each mode ([Print],
[Scan]) to remove the checkmarks.
When finished, tap the [Submit] key.
18
Security settings
■ Job Status Display Setting
You can select whether or not filenames of print jobs and destination names of image
send jobs are displayed in the job status screen of the touch panel. If you do not want to
display this information for security reasons, select the appropriate checkboxes.
■ Release Lock on File/Folder Operation
This function is used to release document filing folders and files and encrypted PDF
files, that are locked due to the entry of an incorrect password.
Tap the [Release] key to release all locked items. After this is done, the items can be
manipulated. When no items are locked, the [Release] key is grayed out.
19
Document Control Setting
3
Document control
The document control function is used to embed a document control pattern on the paper
when a copy, print job, or list print is printed.
If a person attempts to scan a document with an embedded document control pattern on a SHARP
machine that has the document control function enabled, the message "Document control pattern
is detected. This job is canceled." will appear and an e-mail will be sent to the administrator.
This prevents secondary copying and of sensitive documents.
Document control may not be effective when certain original sizes or types,
certain paper sizes or types, or certain settings are used.
To enable effective operation of the document control function, observe the
following points.
● Original
● The function may not operate correctly if the original consists of large
proportion of photographs.
● The document control function is intended to protect text data, and thus it
may not operate correctly if used to protect graphic data.
● Color of document control pattern
● Select a color in a color family that is different from the paper color.
● Paper on which the document control pattern is printed
● To allow selection of the colors black, cyan, and yellow, use Sharp
recommended paper.
● White paper is recommended. If paper other than white paper is used, the
document control pattern may not be detected and the function may not
operate correctly.
● Use B5 or larger size paper.
The following paper sizes can be used:
A3W (12" x 18"), A3, B4, A4, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13",
8-1/2" x 11", 7-1/4" x 10-1/2"R, 8K, 16K
(When the paper size is A4 or smaller, the paper can be used in both the
horizontal and vertical orientations.)
Disclaimer
Sharp does not guarantee that the document control function will always operate
effectively. There may be some instances in which the document control function does
not operate effectively.
20
Document Control Setting
Modes to which the document control function can be added
The document control function can be used to print with an embedded document control
pattern in the following modes:
● Copy (color / black and white)
● Printer (color / black and white)
● Document Filing Print (color / black and white)
● Direct SMTP Receive (black and white only)
● List Print (black and white only)
Enabling the document control function
To enable the document control function, follow these steps.
Tap the [SETTINGS] key, then tap the [Security Settings] key, and the [Other Settings] key
to display "Document Control Setting", and configure the settings.
■ Settings for printing files stored by document filing
These settings are for printing the data of copy jobs and print jobs that have been stored
on the machine's hard drive using the document filing function. To have a document
control pattern always printed when a stored file is printed if a document control pattern
was printed when the job was originally executed, select the [Always Add the Pattern if
You Print with it at Stored] checkbox
.
21
Document Control Setting
■ Settings related to Copy/Printer/Document Filing Print modes
Settings related to copy, print, and document filing print modes can be configured
in the "Copy", "Printer", and "Prints (Document Filing)" fields of the document control
setting screen.
● Document Control Print Select (Select the printing method)
Tap the select box
to display the list of items, and then tap one of the items to select it.
Not Printing:
The document control pattern is not printed.
Always Print:
The document control pattern is always printed.
Allow User to Select:
The user can select whether or not the document control pattern is printed each time he
or she sets up a print job.
● Print Pattern Setting (Select the pattern to be printed)
"Always Print" or "Allow User to Select" can be selected in "Document Control Print Select"
to select a pattern setting.
To select one of patterns 1 to 5, tap the select box
. Tap one of the items to select it.
If you find that the document control function cannot be used for a particular printed image,
try changing the pattern setting (patterns 1 to 5).
● Print Color Setting (Select the color)
"Always Print" or "Allow User to Select" can be selected in "Document Control Print Select"
to select print color settings.
To select the print color, tap the select box
[Bk(Black)] :
. Tap one of the items to select it.
The document control pattern is always printed in black.
[C(Cyan)] :
The document control pattern is always printed in cyan (Only when color mode is selected).
[Y(Yellow)] :
The document control pattern is always printed in yellow (Only when color mode is selected).
[Allow User to Select the Print Color] checkbox:
When this checkbox is selected (
), the color selected here will be the initially
selected default color for the document control pattern. The user can change the color
each time he or she executes a print job.
22
Document Control Setting
■ Settings related to List Print modes
● Document Control Print Select (Select the printing method)
Tap the select box
to display the list of items, and then tap one of the items to select it.
Not Printing:
The document control pattern is not printed.
Always Print:
The document control pattern is always printed.
● Print Pattern Setting (Select the pattern to be printed)
If "Always Print" is selected in "Document Control Print Select", a pattern setting can be
selected.
To select one of patterns 1 to 5, tap the select box
. Tap one of the items to select it.
If you find that the document control function cannot be used for a particular printed image,
try changing the pattern setting (patterns 1 to 5).
23
Document Control Setting
Using the document control function
When the document control function is used, a document control pattern is printed on the
paper on which copies, print jobs, and list prints are printed.
■
Pages on which a document control pattern is printed (all modes)
●The document control pattern is printed on all pages output by a Sharp machine that has the
document control function, including the back side of pages printed by 2-sided printing.
●When a blank page is output because an odd number of pages were printed by 2-sided
printing, a document control pattern will not be printed on the blank page.
●When using the covers/inserts function (including transparency inserts), a document
control pattern will be printed only on covers and inserts that are copied on. A
document control pattern is not printed when a copy is not made on a cover or insert.
After enabling the document control function, follow these steps to use the function.
■ Using document control in copy mode
Tap the [Others>>] key in copy mode.
Step 1: Tap the [Document Control] key.
The display of the [Document Control] key and the steps that follow vary
depending on the settings configured for the document control setting.
24
Document Control Setting
Settings for the document control function.
"Others" screen
Document Control
Print Select
(Copy) setting
State of the Print Color
Settings (copy)
checkbox
[Document Control]
key display
Following steps
[Not Printing]
[Always Print]
-
Grayed out
Highlighted
Not available
Go to step 2
Highlighted
When the key is
tapped, a beep sounds
to indicate that the key
is not available.
[Allow User to Select]
Normal display
Normal display
Go to step 2
When tapped, the key
is highlighted and the
function is enabled.
Step 2: Tap the [Bk(Black)] key, [C(Cyan)] key or [Y(Yellow)] key.
Step 3: Tap the [Color Start] key or the [B/W Start] key.
● If either the [C(Cyan)] key or the [Y(Yellow)] key is tapped in step 2, the
[B/W Start] key cannot be pressed.
● When the color mode is single color, document control pattern printing is not
possible.
● When combining the document control function with other functions (e.g., B/W
Reverse, Mirror Image), document control pattern is always printed at the
same pattern, regardless of the other functions' settings. For example, B/W
Reverse reverses black and white of the copy image, but does not reverse the
document control pattern printing.
25
Document Control Setting
■ Using the document control function in printer mode
● When [Always Print] is enabled in [Document Control Print Select] in the setting mode,
a document control pattern is always printed.
●
If [Allow User to Select] is enabled, follow the procedure below to print a document control
pattern.
Step 1: Select the [Data Security Kit] checkbox in the initial settings screen
(properties screen) of the printer driver.
Step 2: Before executing printing, click the [Advanced] tab of the printer driver
properties window and click the [Document Control] button.
Step 3: Select the [Document Control] checkbox and select [Black], [Cyan], or
[Yellow] from [Print Color].
■ Using the document control function in document filing mode
After a file has been stored by document filing using the settings configured in
"Document Control Setting", follow the steps below to print a document control pattern.
(For information on using files stored by document filing, see the User's Manual (PC).)
Document Control Print Select
When [Allow User to Select] is selected, the [Document Control] key can be tapped to
select whether or not a document control pattern is printed. However, if the [Always Add
the Pattern if You Print with it at Stored] checkbox is selected (
), document control
pattern printing cannot be canceled regardless of whether [Allow User to Select] is
selected or not.
Step 1: Tap the [Others>>] key in the print settings screen, and tap the [Document
Control] key.
If "Not Printing" is selected in "Document Control Print Select" in the document
control settings, the [Document Control] key is grayed out to prevent selection.
(However, for files that had document control patterns printed when the files were
saved, the [Document Control] key can be tapped if the [Always Add the Pattern if
You Print with it at Stored] checkbox has been selected
control settings.)
(
)
in the document
26
Document Control Setting
Step 2: If the [Allow User to Select the Print Color] checkbox is selected in
(
)
[Document Control Print Select] in the document control settings, tap the
[Bk (Black)] key, the [C (Cyan)] key or the [Y (Yellow)] key.
If the color mode of the stored file is set to a mode other than full color, [Bk(Black)] will be
selected and it will not be possible to change the setting to [C(Cyan)] or [Y(Yellow)].
Step 3: Tap the [Print and Delete the Data] key or the [Print and Save the Data] key.
■ Using the document control function in List Print modes
No special operation is required. When printing takes place, a black and white document
control pattern is embedded according to the document control function settings.
■ Body text commands for E-mail Direct Print
The command below can be entered in the body text of a direct print e-mail to specify
whether or not a document control pattern is to be printed.
Function
Command name
Value
Entry example
Pattern printing
ON/OFF
DOCUMENTCONTROL
ON
OFF
DOCUMENTCONTROL=ON
27
EX1
|